Sony LF-PK1 - Manual (Page 17)

Setu
p an
d Co
nn
ecti
o
n
s
17
2
Double-click the (LocationFree Player)
icon on the desktop of the computer.
You can also use the [Start] menu. Point to
[All programs] ([Programs] in Windows
2000), [Sony LocationFree Player], and then
click [LocationFree Player].
LocationFree Player starts, and the [NetAV
Connection] window appears.
Notes
• Depending on the security software installed
on the computer, a confirmation message may
be displayed at startup to confirm whether to
block LocationFree Player. If a message
appears, set to unblock it.
• If the destination base station cannot be found
at startup, a confirmation message appears. For
details on changing the settings of the security
software, click [Web Support] in the [Base
Station Selection] window and refer to the
support page that appears.
3
In the [Base Station Selection] window,
select a base station with a green icon from
the list, and then click [Connect].
z
Tip
You can change the nickname on the screen that
appears if you click [Properties].
Note
Before clicking [Connect], check that the SETUP
MODE LED is still blinking. If the SETUP
MODE LED turns on without blinking, keep
pressing the SETUP MODE button until the LED
starts blinking.
Open a connection with the base station.
Base station registration begins
automatically.
4
Click [OK] to connect to the base station.
The base station is restarted automatically
after registration. Wait until a connection is
established with the base station.
Go to page 29 and set the TV channels.
To watch TV and videos away from home,
proceed to the next section “STEP 2 Setup to
Watch TV Away from Home.”
Select a green icon.