Sony LF-PK1 - Manual (Page 39)

Ad
v
a
nc
ed
Ba
se Station Settings
39
1
Set [IP Address Settings] to [Manual] in the
[Internet Connection] frame and then enter
the following information.
IP Address: 192.168.0.64
*1
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
*2
*1
Example when the IP address of the router
is 192.168.0.1. If the IP address of the
router is 192.168.1.1, enter 192.168.1.64
for the IP address. If you are using multiple
base stations, set a different setting for
each base station, such as 64 and 65.
*2
Example when the IP address of the router
is 192.168.0.1. If the IP address of the
router is 192.168.1.1, enter 192.168.1.1
for the default gateway.
2
Set [Manual] for [DNS Configuration] and
enter the following information.
DNS1: 192.168.0.1
*3
DNS2: It is OK to leave the field blank.
*3
Example when the IP address of the router
is 192.168.0.1. If the IP address of the
router is 192.168.1.1, enter 192.168.1.1
for the DNS1.
3
Click [Set].
4
Set port forwarding on the router.
Enter the Port Number that you set while
making NetAV Settings.
For details, refer to the operating
instructions for your router.
To connect to the base station via your router at
home and to use NetAV when you are away from
home, port forwarding needs to be set on the
router.
When your router is compatible with UPnP
(Universal Plug and Play), you can use UPnP to
configure port forwarding on the router
dynamically.
z
Tip
For details about router settings, refer to the operating
instructions for your router.
1 Select whether to enable or disable automatic
router configuration (UPnP).
When [Disable UPnP] is set, port forwarding
needs to be set on the router.
At the time of purchase, this is set to [Enable
UPnP].
2 Click this and save changes.
UPnP Settings
2
1