Sony LF-PK1 - Manual (Page 40)

Ad
v
a
nc
ed
Ba
se Station Settings
40
To use the NetAV function to watch TV and
videos away from home, you need to use the
Dynamic DNS service. You can use the Dynamic
DNS service that can be set from the [Easy
Setup]. You do not need to configure the
following settings if you performed the [Easy
Setup].
Checking Registered Dynamic DNS
Information
The [Dynamic DNS Settings] frame appears
when you click [Dynamic DNS Settings].
1 A domain name appears here if you have used
the [Easy Setup] to register with the preset
Dynamic DNS service.
2 The current status of the Dynamic DNS
settings appears here. “Success” appears if the
service works correctly.
3 Click this if you want to change the Dynamic
DNS settings manually.
z Tip
If an [Easy Setup] has already been performed, the
current Dynamic DNS setting status appears in
[Current Status]. If the Dynamic DNS is set manually
after performing an [Easy Setup], the Dynamic DNS
registered by the [Easy Setup] is canceled.
Setting Dynamic DNS Manually
If you want to use a Dynamic DNS service other
than the one you can set with [Easy Setup], set the
Dynamic DNS manually.
1 Enter the user name that you registered with
the Dynamic DNS service.
2 Enter the password that you registered with
the Dynamic DNS service.
3 Enter the URL for updating DNS information.
4 Enter the URL for detecting IP addresses.
5 Enter a renewal time for the IP Address
between 10 and 999 minutes.
6 Click this to save changes.
Dynamic DNS Settings
2
1
3
2
3
4
5
1
6