Locationfree player system requirements, Installing and uninstalling locationfree player, Installing locationfree player software – Sony LF-PK1 User Manual

Page 32

Advertising
background image

Setting

Up LocationFr

ee Pla

y

e

r

32

Computer requirements (where
LocationFree Player is installed)

Operating system:

Windows 2000 Professional Service Pack 4
Windows XP Professional/Home Edition
Service Pack 2

Processor:

Pentium 4, 1 GHz or more

RAM:

256 MB or more

Available hard disk space:

300 MB or more

Monitor resolution:

800 x 600 pixels or more, HighColor (16 bit) or
more

Other:

• A wireless LAN card that complies with

IEEE802.11b, IEEE802.11g or
IEEE802.11a. The card must support WEP
encryption. (Required to connect directly to
the base station via a wireless LAN.)

• A 10BASE-T or 100BASE-TX LAN

connector. (Required to connect via a wired
LAN.)

Note

Some video cards (graphic cards) may distort video
picture while using the LocationFree Player. If you see
distorted images while using, please be sure to check
your PC manufacture’s web site for the latest driver
software.

Use the procedures in this section to install and
uninstall LocationFree Player.

z

Tips

• LocationFree Player is compatible with Windows

XP (Service Pack 2) and Windows 2000
Professional (Service Pack 4). It cannot run on other
operating systems.

• LocationFree Player must be installed from a user

account with administrator privileges. Before
performing the installation, log on to Windows as a
user with administrator privileges.

• If Microsoft DirectX 9.0 is not installed on the

computer where you choose to install LocationFree
Player, it is installed at the same time you install
LocationFree Player.

Notes

• 3ivx is installed at the same time as LocationFree

Player. 3ivx is essential to the proper operation of
LocationFree Player and it should not be removed.

• If LFA-PC1 is installed, LFA-PC2 cannot be

installed. Uninstall LFA-PC1 before you install
LFA-PC2.

1

Insert the LocationFree Player software
CD-ROM into the CD-ROM drive of your
computer.
The installation wizard starts.

If the installation wizard does not start, find
the “setup.exe” file on the CD-ROM, and
then double-click it.

LocationFree Player
System
Requirements

Installing and
Uninstalling
LocationFree Player

Installing LocationFree Player
Software

Advertising
This manual is related to the following products: