Sony LF-PK1 - Manual (Page 42)

Ad
v
a
nc
ed
Ba
se Station Settings
42
1 To enable device registration, select [Enable].
2 The base station’s current registration
processing status appear here.
3 The password needed to register a device with
the base station appears here.
You will need this password when you make
device registration settings on the device side,
so make a note of it.
4 When you click this button, the base station
confirms the state (Enable/Disable) selected
for [Registered devices].
5 A list of the devices currently registered with
the base station appears here.
6 If you want to stop connecting to the base
station from a registered device, check the
device in the “List of Registered Devices” list
and click the [Delete] button.
Generating a Registration Password
1
Select [Enable] under [Register Devices].
2
Click [Set].
3
Click [Device Registration] in the left frame.
The registration password appears.
z
Tips
• The registration password changes with every
registration. If you cancel a registration, and then
start another registration, the registration password
changes to a new password.
• To check whether device registration is complete,
click [Update] under [List of Registered Devices].
You can change the wireless settings of the base
station. If the settings of the base station are
changed, the wireless settings of the device to be
connected to also need to be changed.
1 Wireless LAN devices that conform to the
IEEE802.11a, b, or g standards can be used on
the following channels. When connecting
your computer to the base station via a
wireless connection, select a channel
supported by the LAN device.
• IEEE802.11a wireless LAN device: 5 GHz
• IEEE802.11b wireless LAN device: 2.4
GHz
• IEEE802.11g wireless LAN device: 2.4
GHz
2 An SSID is already entered here at the time of
purchase (the characters shown on the side of
the base station). If you want to change it,
enter a string of up to 32 alphanumeric
characters and symbols.
An SSID is an ID that identifies a wireless
network.
3 [WEP] and [WPA-PSK with TKIP] are
encryption methods. Select one or the other,
and enter an encryption key or a pre-shared
key.
2
3
5
1
6
4
Changing the
Wireless Settings of
the Base Station
Wireless Settings
2
3
1
4
5