Location and function of parts and controls, Front / rear / left side / right side / bottom, Emplacement et fonction des pièces et commandes – Sony FWD-42PV1 User Manual

Page 55: Lage und funktion der teile und bedienelemente, Ubicación y función de componentes y controles, Posizione e funzione dei comandi e delle parti

Advertising
background image

7

(GB)

Location and Function of Parts and Controls

Location and Function
of Parts and Controls

Front / Rear / Left side / Right side /
Bottom

Front

Left side

Rear

1

Indicator section

For details on the Indicator section, see “Indicator
Section” on page 8 (GB).

2

Control button section

For details on the control button section, see “Control
Button Section (Top)” on page 8 (GB).

3

Stand installation hooks

Use these hooks to install the stand (not supplied).

4

AC OUT socket (three brade type)

You can connect a device consuming small power to
this socket and supply power when setting up an
audio/visual system (the maximum current rating:
0.25 A; the maximum power consumption: 30 W). For
more details, consult your Sony dealer.

Note

Be sure not to connect the device of which current
rating or power consumption exceeds its rating.

5

SPEAKER Socket

Connects the speakers (not supplied) to this socket to
output the audio matching the signal displayed on the
screen.

6

- AC IN socket

Connect the supplied AC power cord to this socket
and to a wall outlet. Once you connect the AC power
cord, the POWER/STANDBY indicator lights up in
red and the display goes into the standby mode.

For more details on the power cord, see “Connecting the
AC Power Cord” on page 15 (GB).

7

Connector panel

For details on the connector panel, see “Connector Panel
(Bottom)” on page 9 (GB) and “Connector Panel (Left
side)” on page 10 (GB).

1

2

3

5

4

7

5

6

7

7

5

Right side

Bottom

SPEAKER R

AC
OUT

FUSE

100-240V~ 50-60Hz

Maxim

um 0.25A

T500mA H

250V

4

5

7

6

Advertising
This manual is related to the following products: