Sony FWD-42PV1 - Manual (Page 69)

21
(GB)
Using On-screen Menus
Auto Screen Adjust
When “Auto Screen Adjust” is set to On, it saves the
screen-settings for size and positioning for each input
signal on the unit and automatically detects the last
setting in memory each time input signals are
switched.
When “Auto Screen Adjust” is set to Off, this auto
adjustment is set disabled. Even when input signals
are switched, the original factory settings operate.
Information
This menu is used for displaying various information,
including information on the internal status of the
display unit.
INITIAL SETUP/INFORMATION
Information
Model Name:
Serial Number:
Operation Time:
Software Version:
Set ENTER Exit MENU Select
Model Name
Indicates the model name.
Serial Number
Indicates the serial number.
Operation Time
Indicates the total number of hours of operation.
Note
Time spent in standby mode is not counted as part of
the Operation Time.
Software Version
Indicates the system software version.
IP Address Setup
Sets an IP address to communicate between the
display unit and BKM-FW32 (Network Management
Adaptor).
DHCP: Automatic configuration to set an IP
address.
Manual: Manual configuration to set an IP address.
For details, see “Setting an IP Address and communication
speed” on page 42 (GB).
Speed Setup
Sets a communication speed between the display unit
and BKM-FW32 (Network Management Adaptor).
For details, see “Setting an IP Address and communication
speed” on page 42 (GB).
These setting items appear on the menu only when the
BKM-FW32 (Network Management Adaptor) is
installed in the COMMUNICATION slot.
TIMER/CLOCK menu
You can set the timer, adjust time, display the built-in
clock, or make the unit power on/off at a
predetermined time.
TIMER/CLOCK
Clock Set
Clock Display:
On/Off Timer
Off
Set ENTER Exit MENU Select
Note
The time and the day are not preset in the factory
setting.
Clock Set
Sets the time and the day.
For details, see “Adjusting the time and the day” on page
38 (GB).
Clock Display
Displays the currently set time on the screen when set
to On.
For details, see “Displaying the time” on page 38 (GB).
On/Off Timer
Sets the time at which the power is automatically
turned on or off.
For details, see “On/Off Timer Function” on page 39 (GB).