Sony LBT-XGR6 - Manual (Page 16)

16 GB
Timer-recording radio programs
(continued)
7
Turn off the power.
When the recording starts, the volume level
is set to the minimum.
To
Check the setting
Cancel timer
operation
Notes
• The system turns on 15 seconds before the preset
time.
• If the system is on at the preset time, the Timer
recording will not be made.
• When you use the Sleep Timer, Timer recording
will not turn on the system until the Sleep Timer
turns it off.
• Recording starts from the front side.
Do this
Press TIMER SELECT (or
CLOCK/TIMER SELECT on
the remote). Press
R/r to select
“REC SELECT”. Then, press
ENTER. To change the setting,
start over from step 1.
Press TIMER SELECT (or
CLOCK/TIMER SELECT on
the remote). Press
R/r to select
“TIMER OFF”. Then, press
ENTER.
Adjusting the sound
To reinforce lower bass sound
(SUPER WOOFER)
Press SUPER WOOFER.
Each time you press this button, the super
woofer level display changes cyclically as
follows:
SUPER WOOFER FLAT t LOW t HIGH
Tip
SUPER WOOFER button lights up when super
woofer mode is activated.
To select the super woofer mode
Press SUPER WOOFER MODE while the
super woofer is on.
Each time you press this button, the super
woofer mode display changes as follows:
MODE MOVIE y MODE MUSIC
For a powerful sound (GROOVE)
The volume switches to power mode and the
equalizer curve changes.
Press GROOVE.
Press GROOVE again to return to the previous
volume.
For a powerful and vivid sound (X-
GROOVE)
The middle frequency of the music you are
listening to is powerfully reinforced, the
equalizer curve changes and loudness is
increased.
Press X-GROOVE.
Press X-GROOVE again to cancel the
reinforcement.
Note
Canceling the Groove mode cancels the equalizer
curve and super woofer level. Adjust the equalizer
settings to obtain the desired effect.
Sound Adjustment