Sony LBT-XGR6 - Manual (Page 25)

Optional Components
25 GB
E PHONO IN jacks
Use audio cords (not supplied) to connect an
optional component (such as a turntable) to
these jacks. You can then record or listen to
analogue audio from that component through
this system.
F DJ MIX SEND jacks (mixer for
North American and Mexican
models only)
Before connecting these jacks, remove the pre-
installed jumper for connecting the DJ MIX
RETURN and SEND jacks. Use audio cords
(not supplied) to connect an optional
component (such as a mixer) to these jacks.
You can then output audio to that component
from this system.
G DJ MIX RETURN jacks (mixer for
North American and Mexican
models only)
Before connecting these jacks, remove the pre-
installed jumper for connecting the DJ MIX
RETURN and SEND jacks. Use audio cords
(not supplied) to connect an optional
component (such as a mixer) to these jacks.
You can then record or listen to analogue audio
from that component through this system.
H I
Optional video game
From the video
output of a video
game
From the audio
outputs of a video
game
H GAME INPUT AUDIO L/R jacks
Use audio cords (not supplied) to connect an
optional component (such as a video game or
camcorder, etc.) to these jacks. You can then
record or listen to analogue audio from that
component through this system.
I GAME INPUT VIDEO jack
Use video cord (not supplied) to connect an
optional component (such as a video game or
camcorder, etc.) to this jack. You can then
output video to the connected TV from that
component through this system.
Notes
• Be sure to match the color of the plugs and the
connectors.
• Using a turntable at high volume may cause
distortion or howling. This is often caused by the
bass sound from the speakers. The bass sound may
produce the distortion or howling. To avoid this, do
the following:
1 Keep some distance from speakers to the
turntable.
2 Stop using the surround effect.
3 Install the speakers or the turntable on a firm and
stable surface.
4 Press SUPER WOOFER repeatedly until the
indicator on this button goes off.
• Replace the jumpers when the mixer is not in use.
Otherwise, no sound will be heard. Be sure to
connect the jumpers from the RETURN jack to the
SEND jack of the unit.
Two jumpers are pre-installed connecting the DJ
MIX RETURN and SEND jacks.