Sony LBT-XGR6 - Manual (Page 26)

26 GB
Listening to audio from a
connected component
Listening to an MD deck or
VCR, etc.
1
Connect the audio cords.
See “Hooking up optional components” on
page 24.
2
Press FUNCTION repeatedly until “MD”
or “VIDEO” appears.
Start playing the connected component.
Notes
• Holding down FUNCTION, and then pressing
`/1 while the power is off automatically turns the
power on and selects “VIDEO” as the function.
When the system is in power saving mode, this
function does not work.
• If the sound is distorted or too loud when “VIDEO”
is selected or you want to switch back to “MD,”
repeat the operation described above to switch to
“MD.”
Listening to a turntable, etc.
1
Connect the audio cords.
See “Hooking up optional components” on
page 24.
2
Press FUNCTION repeatedly until
“PHONO” appears.
Start playing the connected component.
Listening to a video game or
camcorder, etc.
1
Connect the audio cords.
See “Hooking up optional components” on
page 24.
2
Press FUNCTION repeatedly until
“GAME” appears or press GAME in the
right corner of the front panel.
Start playing the connected component.
Listening to an audio from
mixer, etc.
1
Connect the audio cords.
See “Hooking up optional components” on
page 24.
2
Press FUNCTION repeatedly until “CD”
appears.
Start playing the connected component.