Sony LBT-XGR6 - Manual (Page 8)

8 GB
Inserting two size AA (R6)
batteries into the remote
Tip
When the remote no longer operates the system,
replace both batteries with new ones.
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage.
Setting the clock
1
Turn on the system.
2
Press c /CLOCK SET (or CLOCK/TIMER
SET on the remote).
3
Press R / r repeatedly to set the hour.
4
Press ENTER.
The minute indication flashes.
5
Press R / r repeatedly to set the minute.
6
Press ENTER.
The clock starts working.
If you make a mistake
Press T/t repeatedly until the incorrect item
flashes, then set it again.
To adjust the clock
1 Press c /CLOCK SET (or CLOCK/TIMER
SET on the remote).
2 Press R / r to select “CLOCK SET,” then
press ENTER.
3
Do the same procedures as step 3 to 6
above.
Notes
• The clock settings are canceled when you
disconnect the power cord or if a power failure
occurs.
• You cannot set the clock in the Power Saving
Mode.