Sony STR-DH130 - Manual (Page 18)

18 GB
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB04CON_STR-DH130-
U2.fm masterpage: Left
STR-DH130
4-294-472-11(1)
5: Connecting the AC
power cord (mains lead)
Connect the AC power cord (mains lead) to a
wall outlet.
Initializing the receiver
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to revert back to the factory default
settings.
Be sure to use the buttons on the receiver to
perform this operation.
1
Press ?/1 to turn off the
receiver.
2
Hold down ?/1 for 5 seconds.
The “CLEARING” appears on the
display panel for a while, then changes to
“CLEARED”.
Changes or adjustments made to the
settings are now reset to the defaults.
AC power cord (mains lead)
To the wall outlet
Preparing the Receiver
?/1