Sony DSC-H400 - Manual (Page 141)

Digital Still Camera
DSC-H400
Protect
You can protect recorded images against accidental erasure.
The
mark is displayed for registered images.
1. Set the camera to playback mode.
2. MENU - (Protect) - desired mode - on the control button
(This Image):
Protects the currently displayed image in single-image mode.
(Multiple Images):
You can select and protect multiple images.
1. After step 2, select an image to be protected, then press .
To cancel the selection, press again to cancel the mark.
2. MENU - [OK] -
Note
When internal memory is used for recorded images, View Mode is set to Folder View and still images and movies are
displayed in the same folder.
To cancel protection
Select the image for which you want to cancel protection, and unlock it by pressing on the control button as the same
procedure to protect it. The
indicator disappears, and the protection is released.
Notes on use
4-488-060-11(1)
Copyright 2014 Sony Corporation
Help Guide
How to use
137