Installing playmemories home, Help guide – Sony DSC-H400 User Manual
Page 167
Digital Still Camera
DSC-H400
Installing PlayMemories Home
1. Using the Internet browser on your computer, go to the following URL, then install PlayMemories Home.
Follow the instructions on the screen to complete the installation.
When the installation is completed, PlayMemories Home will start.
If the software PMB (Picture Motion Browser) has already been installed on your computer, it will be overwritten
by PlayMemories Home during the installation. Use PlayMemories Home the successor software of PMB.
2. Connect the camera to your computer using the dedicated USB cable (supplied) (A).
Some new functions may be added to the PlayMemories Home. Even if PlayMemories Home is already installed,
connect the camera to your computer.
A: To a USB jack of the computer
B: To the USB A/V OUT terminal
Note
Log on as Administrator.
It may be necessary to restart your computer. When the restart confirmation message appears, restart the computer
following the instructions on the screen.
DirectX may be installed depending on your computer’s system environment.
4-488-060-11(1)
Copyright 2014 Sony Corporation
How to use
163