Sony WEGA KV-20FA210 - Manual (Page 21)

Connecting Your TV
13
TV and Cable Box
1
Connect the coaxial cable from your cable service to the IN jack on your cable box.
2 Connect a coaxial cable (not supplied) from the OUT jack on your cable box to the
VHF/UHF jack on your TV.
Using your TV with this connection
This connection allows you to do the following:
❏ Program your Sony remote control to operate your cable box (see page 5).
❏ To activate your remote press to operate your cable box and then use the
buttons or CH+/- buttons to change the channels. To do this, first program your remote
control, then use the Channel Fix feature to set your TV to channel 3 or 4 (see page 28).
V
AR/FIX
( )
1 3 SUBW
OOFER
A
UDIO
AUDIO UDIO AUDIO UDIO
1
2
Rear of TV
Cable box
From cable/
antenna
0 9