Connecting a tv, vcr, and satellite receiver, 3satellite receiver 1 4 5, Rear of tv – Sony WEGA KV-20FA210 User Manual
Page 24
16
Operating Instructions
Connecting a TV, VCR, and Satellite Receiver
1
Connect the coaxial cable from your satellite antenna to SATELLITE IN on the satellite
receiver.
2
Connect the coaxial cable from your cable service or antenna to the IN jack on your VCR.
3
Using a coaxial cable (not supplied), connect the OUT jack on your VCR to the VHF/UHF
jack on your TV.
4
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite
receiver to AUDIO/VIDEO IN on your VCR.
5
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your VCR to
AUDIO/VIDEO IN on your TV.
Using your TV with this connection
This connection allows you to do the following:
❏
Program your Sony remote control to operate your VCR or satellite receiver (see page 5).
❏
Turn on your VCR to enable your satellite receiver to work with this connection.
❏
To activate your remote, press
to operate your VCR or
to operate your satellite
receiver.
❏
Press
repeatedly to switch between VCR input (VIDEO input), VHF/UHF
(local channels or unscrambled), or your cable box (cable system or scrambled channels).
✍
To view from the satellite receiver or VCR, select the video input to which your satellite receiver or
VCR is connected by pressing
on the remote control.
V
AR/FIX
( )
1
3
SUBW
OOFER
A
UDIO
AUDIO
UDIO
AUDIO
UDIO
2
From
cable/
antenna
3
Satellite receiver
1
4
5
VCR
Rear of TV
Audio R (red)
Audio L (white)
Video (yellow)