Sony WEGA KV-20FA210 User Manual

Page 49

Advertising
background image

Other Information

41

Video

Audio

Dynamic Bass Response System (Subwoofer)

Problem

Possible Remedies

No picture, no
sound

Make sure the power cord is plugged in.

If a red light is flashing on the front of your TV for more than a
few minutes, disconnect and reconnect the power cord. If the
problem continues, call your local service center.

Check the TV/VIDEO setting: when watching TV, set it to TV;
when watching video equipment, set it to VIDEO 1, 2, 3, 4 or 5
(page 3).

Make sure you have inserted the batteries correctly into the
remote control (page 2).

Try another channel to rule out station trouble.

Poor or no picture,
good sound

Adjust the Picture setting in the Video menu (page 24).

Adjust the Brightness setting in the Video menu (page 25).

Check the antenna and/or cable connections (page 10).

No color

Adjust the Color setting in the Video menu (page 24).

Only snow appears
on the screen

Check the Cable setting in the Channel Setup menu (page 28).

Check the antenna and/or cable connections (page 10).

Make sure the channel selected is currently broadcasting.

Dotted lines or
stripes

Adjust the antenna.

Move the TV away from other electronic equipment. Some
electronic equipment creates electrical noise, which can
interfere with TV reception.

Double images or
ghosts

Check your outdoor antenna or call your cable service.

Problem

Possible Remedies

Good picture, no
sound

Press

so that Muting disappears from the screen (page 3).

Check your Audio settings. Your TV may be set to Auto SAP in
the MTS feature (page 27).

Make sure the speaker option is set to On in the Audio Menu.

Press

to adjust your TV's volume.

Problem

Possible Remedies

No sound

Check the SUBWOOFER +/- inputs on the rear panel of the TV
to make sure the cables are connected correctly (see page 11).

Advertising