Sony WEGA KV-20FA210 - Manual (Page 23)

Connecting Your TV
15
Connecting a TV and Satellite Receiver
1 Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver.
2
Connect the coaxial cable from your cable service or antenna to the VHF/UHF jack on
your TV.
3
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite
receiver to AUDIO/VIDEO IN on your TV.
Using your TV with this connection
This connection allows you to do the following:
❏ Program your Sony remote control to operate your satellite receiver (see page 5).
❏ To activate your remote, press to operate your satellite receiver. See page 7 on how
to operate other functions.
❏ Press repeatedly to switch to satellite receiver input (VIDEO input).
V
AR/FIX
( )
1 3
SUBW
OOFER
A
UDIO
AUDIO UDIO AUDIO UDIO
Satellite receiver
Satellite
antenna
cable
1
2
3
From
cable/
antenna
Video (yellow)
Audio R (red)
Audio L (white)
Rear of TV