Sony DCR-HC32 - Manual (Page 10)

10
DCR-HC32/HC42 2-584-906-11(1)
Step 2: Charging the battery pack
You can charge the “InfoLITHIUM”
battery pack (P series) (p. 109) after
attaching it to your camcorder.
POWER
switch
DC plug
Handycam
Station
DC IN jack
AC Adaptor
To the wall outlet
1
Attach the battery pack by sliding
it in the direction of the arrow
until it clicks.
2
Slide the POWER switch up to
OFF (CHG). (The default setting.)
3
Connect the AC Adaptor to the
DC IN jack on the Handycam
Station.
With the 
mark facing up
DC IN jack
4
Connect the power cord to the AC
Adaptor and the wall outlet.
5
Insert the camcorder into the
Handycam Station securely, all
the way to the bottom.
CHG (charge) lamp
The CHG (charge) lamp lights up and
charging starts.
• When inserting the camcorder into the
Handycam Station, close the DC IN jack
cover.