Sony DCR-HC32 - Manual (Page 101)

101
Troubleshooting
DCR-HC32/HC42 2-584-906-11(1)
 (Warning indicators pertaining to
the tape)
Slow flashing:
• There is less than 5 minutes remaining
on the tape.
• No cassette is inserted. *
• The write-protect tab on the cassette is
set to lock (p. 106). *
Fast flashing:
• The tape has run out. *
 (Eject cassette warning)*
Slow flashing:
• The write-protect tab on the cassette is
set to lock (p. 106).
Fast flashing:
• Moisture condensation has occurred (p.
112).
• The self-diagnosis display code is
displayed (p. 100).
 (Warning indicator pertaining to
image deletion)*
• The image is protected (p. 66).
 (Warning indicator pertaining
to the write-protect of the “Memory
Stick Duo”)*
• The write-protect tab on the “Memory
Stick Duo” is set to lock (p. 107).
(Warning indicator pertaining to
the external flash)
Slow flashing:
• Still charging
Fast flashing:
• There is something wrong with the
flash.
(Warning indicator pertaining to
camera-shake warning)
• The amount of lights is not sufficient,
so camera-shake easily occurs. Use the
flash.
• The camcorder is unsteady, so
camera-shake easily occurs. Hold the
camcorder steady with both hands and
shoot the image. However, note that
the camera-shake warning indicator
does not disappear.
* You hear a melody when the warning indicators
appear on the screen (p. 56).
Description of warning
messages
If messages appear on the screen, follow
the instructions.

Battery
Use the “ InfoLITHIUM” battery pack
(p. 109).
Battery level is low.
• Change the battery (p. 10, 109)
Old battery. Use a new one (p. 109).
Re-attach the power source (p. 10).

Moisture condensation
Moisture condensation. Eject the
cassette (p. 112)
Moisture condensation. Turn off
for 1H (p. 112).
Continued 