Sony MZ-RH910 - Manual (Page 48)

48
3
Turn the jog dial downward.
The cursor shifts from the letter input
area to the character palette.
4
Select a letter and press the jog dial to
enter.
The selected letter appears in the
letter input area and the cursor moves
to the next input position.
The buttons used for character input
and their functions are listed below.
5
Repeat step 4, and then enter all
characters of the label name.
6
Press the jog dial for 2 seconds or
more to enter the title
.
Re-labeling
You can change the titles by doing the
procedure for “Labeling” (page 47).
• The recorder is able to display, but cannot
label using Japanese “Katakana” characters.
• The recorder cannot rewrite a disc or track
name of more than 200 letters that was created
by another device (in MD mode only).
Functions 1) Operations
To move the cursor
to the left or to the
right. Press . or >.
To move the cursor
up or down Turn the jog dial.
To enter a letter. Press the jog dial
(N/ENT).
To insert a blank
space. Press VOL +.
To delete a letter. Press VOL –.
To move the cursor
from the character
palette to the letter
input area. Press x.
The cursor and character alternate.
The cursor flashes at the next input
position.
To switch between
capital letters and
small letters
.
Press X.
1) Functions of the buttons or the control may
differ depending on when the cursor is in the
letter input area or in the character palette.
Notes
Functions 1) Operations