Sony MZ-RH910 - Manual (Page 78)

78
DATA SAVE • The recorder is writing information to the system file, such as the recorded
data or editing information.
, Wait until the message disappears from the display.
DC IN TOO
HIGH • Voltage of the power supply is too high (The supplied AC power adaptor is
not used).
, Use the supplied AC power adaptor.
DISC FULL • Recording may not be done if the remaining recordable time on the disc is
48 seconds or less.
, Replace the disc.
DOWNLOAD
READY • MD Simple Burner is now ready to record an audio CD to the disc in the
recorder using Simple mode. (Refer to “Software Operation” section.
EJECT DISC OK • The recorder has finished communicating with the computer and it is safe
to eject the disc from the recorder or disconnect the dedicated USB cable.
END • The recorder reached to the end of the disc while playing or pressing >.
ERROR • There is an internal malfunction in the system.
, Restart the operation by doing steps 1 to 3 on page 76.
ERROR XX • There is an internal malfunction in the system.
, Restart the operation by doing steps 1 to 3 on page 76. If the message
appears again, please consult your nearest Sony dealer.
FOLDER NO
EXPAND • You tried to use the File List function to expand a folder that is already at
the 16th level.
, Files and folders can be expanded down to 16 levels. Expansion beyond
this level is not possible.
FORMAT
ERROR DISC • A disc with a format that the recorder does not support was inserted.
, Insert a disc used in Hi-MD mode.
• A disc formatted on the computer was inserted.
, When formatting a disc on the computer, make sure to use the
SonicStage software.
GROUP FULL • You tried to create a 256th group on a disc used in Hi-MD mode or 100th
group on a disc used in MD mode.
, You can create only up to 255 groups (on a disc used in Hi-MD mode)
or 99 groups (on a disc used in MD mode) on a disc. Keep the group
number within 255 or 99.
HOLD • The recorder is locked.
, Slide HOLD against the arrow to unlock the recorder (page 18).
IN MENU • You pressed a key on the remote control while selecting a menu on the
recorder.
LOW BATTERY • Batteries are weak.
, Charge the rechargeable battery or replace the dry battery (page 17).
MEMORY
OVER • You tried to record with the recorder placed where it receives continuous
vibration.
, Put the recorder on a stable place, and start recording again.
NO
BOOKMARKED
TRACK • You selected bookmark play without setting bookmarks.
, Set bookmarks (page 41).
Message Meaning/Remedy