Antex electronic XM-100 - Manual (Page 11)

XM-100 Commercial Satellite Audio Receiver 11
Display and Indicators
The default display, as shown below, provides information about
the channel currently tuned to, including channel number and
channel name on the first line and scrolling artist name and song
title on the second line.
The display backlight is illuminated and text appears after the
power button has been pressed, indicating the unit is on.
The XM-100 has four indicators and four buttons as follows
(Modes are described below):
Power Indicator – illuminated whenever power present
Setup Indicator – illuminated when in Setup Mode
CHAN Indicator – illuminated when in Channel Mode. Both
CHAN and CAT indicator illuminated in Channel/category
Mode.
CAT Indicator – illuminated when in Category Mode. Both
CHAN and CAT indicator illuminated in Channel/category
Mode.
Power Button – turns unit on/off. Hold for signal strength.
Press to exit setup menus.
Mode Button – cycles operational Mode of unit through
Channel, Category, Channel Category, or Setup. Holding for 4
seconds enters Setup Mode.
Up and Down Buttons – changes channels and used for menu
navigation.