Antex electronic XM-100 - Manual (Page 22)

XM-100 Commercial Satellite Audio Receiver 22
The first display choice, Forced Tuning by Day&Time, displays
Forced Tune events sorted by day of the week first, showing
events within each day sorted by time.
The second display choice, Forced Tuning by Time, displays
Forced Tune events sorted by time of day without
consideration of what days of the week the event is effective.
The third display choice, Forced Tuning by Channel, displays
Forced Tune events sorted by channel number without regard
to any other parameter.
The final menu, Add New, allows you to add a new Forced
Tune event.
Selecting any of the 4 top level menu choices brings up the
following display, with each field described in detail.
F46 C021 V-6
C Mon 11:45A
Force Tune Event
number. Not editable,
up and down arrows on
the remote cycle
through list if in Edit
mode. If in Add New
mode, event number is
displayed for reference
and up and down arrows
do nothing.
Indicates sort mode. “C”
means sorted by Channel
number, “T” means sorted
by time of day, “D” means
sorted by day of week, then
time. “N” indicates the Add
New mode. This field is not
editable.
Day of Week. Use up
and down arrows on
the remote to change.
Mon, Tue, Wed, Thu,
Fri, Sat, Sun, M-F, M-
Th, All (everyday).
Time of day. Hours,
minutes, and AM/PM
are separate fields.
Use up and down
arrows on the remote
to change or numeric
entry. Left and right
arrows move between
fields.
Channel number. Use direct numeric
entry with remote, or up and down
arrows on remote. Down arrow
below channel 000 has options
“*Any” for a volume only change,
“*Off” to turn unit off at scheduled
time, and “*DEL” to delete this
event, ” *LCK” to lock the front
panel, and “UNL” to unlock the front
panel. “SEL” must then be pressed
on the remote to enter the Delete
Confirmation display.
Volume Setting. Use
up and down arrows
on the remote to
change. Range is –9
to +9, is an absolute
setting, and matches
the settings in the
Line Level setup
menu.
F46 C021 V-6
C Mon 11:45A
Force Tune Event
number. Not editable,
up and down arrows on
the remote cycle
through list if in Edit
mode. If in Add New
mode, event number is
displayed for reference
and up and down arrows
do nothing.
Indicates sort mode. “C”
means sorted by Channel
number, “T” means sorted
by time of day, “D” means
sorted by day of week, then
time. “N” indicates the Add
New mode. This field is not
editable.
Day of Week. Use up
and down arrows on
the remote to change.
Mon, Tue, Wed, Thu,
Fri, Sat, Sun, M-F, M-
Th, All (everyday).
Time of day. Hours,
minutes, and AM/PM
are separate fields.
Use up and down
arrows on the remote
to change or numeric
entry. Left and right
arrows move between
fields.
Channel number. Use direct numeric
entry with remote, or up and down
arrows on remote. Down arrow
below channel 000 has options
“*Any” for a volume only change,
“*Off” to turn unit off at scheduled
time, and “*DEL” to delete this
event, ” *LCK” to lock the front
panel, and “UNL” to unlock the front
panel. “SEL” must then be pressed
on the remote to enter the Delete
Confirmation display.
Volume Setting. Use
up and down arrows
on the remote to
change. Range is –9
to +9, is an absolute
setting, and matches
the settings in the
Line Level setup
menu.
The left/right arrows on the remote move the cursor through
the fields that can be changed. The settings for each of the
fields are selected using the up/down keys on the remote.