Sony DCR-PC350 - Manual (Page 10)

Quick Start Guide 10
Quick Start Guide
Recording movies
1
Attach the charged battery pack to the camcorder.
To charge the battery, see page 16.
2
Insert a cassette into the camcorder.
a
Slide the BATT (battery release)
lever in the direction of 1 and push
it down in the direction of 2.
Remove the battery terminal cover
when it lifts up in the direction of 3.
b
Attach the battery pack with its
terminal side facing your camcorder
as shown in the illustration and press
down the battery pack until it clicks.
a
Slide the OPEN/
EJECT
lever in the
direction of the arrow
to open the lid.
The cassette compartment
automatically comes out
and opens up.
b
Insert the cassette with
its window-side facing
up, then push the center
of the back of the
cassette.
c
Press .
Close the cassette lid after
the cassette compartment
slides back in by itself.
OPEN/EJECT lever
Window-side
BATT (battery release) lever