Sony DCR-PC350 - Manual (Page 130)

Additional Information 130
Notes on using the “Memory Stick PRO
Duo” and “Memory Stick Duo”
(MagicGate/Parallel Transfer)
• The maximum memory capacity of a
“Memory Stick PRO Duo” that can be used on
your camcorder is up to 512 MB, and that of a
“Memory Stick Duo” (MagicGate/Parallel
Transfer) is up to 128 MB.
• This unit does not support high speed data
transfer.
Notes on image data compatibility
• Image data files recorded on a “Memory Stick
Duo” by your camcorder conform to the
Design Rule for Camera File Systems
universal standard established by the JEITA
(Japan Electronics and Information
Technology Industries Association).
• On your camcorder, you cannot play back still
images recorded on other device (DCR-
TRV890E/TRV900/TRV900E or DSC-D700/
D770) that does not conform to the universal
standard. (These models are not sold in some
regions.)
• If you cannot use a “Memory Stick Duo” that
has been used with other device, format it with
your camcorder (p. 73). Note that formatting
erases all information on the “Memory Stick
Duo.”
• You may not be able to play back images with
your camcorder:
– When playing back image data modified on
your computer.
– When playing back image data recorded
with other device.
• “Memory Stick,” , “Memory Stick
PRO,” , “Memory Stick
Duo,” , “Memory Stick PRO
Duo,” , “MagicGate,”
are trademarks or registered
trademarks of Sony Corporation.
• All other product names mentioned herein
may be the trademarks or registered
trademarks of their respective companies.
Furthermore, “™” and “®” are not mentioned
in each case in this manual.
About the
“InfoLITHIUM”
battery pack
This unit is compatible with the
“InfoLITHIUM” battery pack (F series). Your
camcorder operates only with the
“InfoLITHIUM” battery pack.
“InfoLITHIUM” F series battery packs have the
mark.
What is the “InfoLITHIUM” battery
pack?
The “InfoLITHIUM” battery pack is a lithium-
ion battery pack that has functions for
communicating information related to operating
conditions between your camcorder and an
optional AC Adaptor/charger.
The “InfoLITHIUM” battery pack calculates
the power consumption according to the
operating conditions of your camcorder, and
displays the remaining battery time in minutes.
To charge the battery pack
• Be sure to charge the battery pack before you
start using your camcorder.
• We recommend charging the battery pack in
an ambient temperature of between 10°C to
30°C (50°F to 86°F) until the CHARGE lamp
turns off. If you charge the battery pack
outside of this temperature range, you may not
be able to charge it efficiently.
• After charging is complete, disconnect the
cable from the DC IN jack on your camcorder,
remove your camcorder from the Handycam
Station or remove the battery pack.
To use the battery pack effectively
• Battery pack performance decreases when the
surrounding temperature is 10°C (50°F) or
below, and the length of time you can use the
battery pack becomes shorter. In that case, do
one of the following to use the battery pack for
a longer time.
– Put the battery pack in a pocket to warm it
up, and insert it in your camcorder right
before you start taking shots.