Sony HT-DDW870 - Manual (Page 25)

Ampl
ifier O
p
e
ration
masterpage:Right
lename[E:\SEM_Janet\Revision_DDW870\J9040000_2549734121DDW870UCA\2549734121\
GB04BSC_HT-DDW870-UCA.fm]
25 GB
model name1[HT-DDW870]
[2-549-734-12(1)]
Tuning to preset stations
1
Press FM or AM to select the FM or AM
band.
The last received station is tuned in.
2
Press PRESET TUNING + or PRESET
TUNING – repeatedly to select the
preset station you want.
Each time you press the button, you can
select the preset station as follows:
Using the remote
1 Press TUNER repeatedly to select the FM or
AM band.
2 Press PRESET/CH/D.SKIP +/– repeatedly
to select the preset station you want.
To select the preset station
directly
Press the numeric buttons on the remote.
The preset station of the selected number in the
current memory page is tuned in. Press SHIFT
repeatedly on the remote to change the memory
page.
(Models of area code CEL, CEK only)
This receiver also allows you to use RDS (Radio
Data System), which enables radio stations to
send additional information along with the
regular program signal. You can also display
RDS information.
Notes
• RDS is operable only for FM stations.
• Not all FM stations provide RDS service, nor do they
provide the same types of services. If you are not
familiar with the RDS services in your area, check
with your local radio stations for details.
Receiving RDS broadcasts
Simply select a station on the FM band
using automatic tuning (page 23), direct
tuning (page 23), or preset tuning
(page 25).
When you tune in a station that provides RDS
services, the RDS indicator lights up and the
program service name appears in the display.
Note
RDS may not work properly if the station you tuned to
is not transmitting the RDS signal properly or if the
signal strength is weak.
Displaying RDS information
While receiving an RDS station, press
DISPLAY repeatedly.
Each time you press the button, RDS
information on the display changes cyclically as
follows:
Program Service name
t Frequency t
Program Type indication
a) t Radio Text
indication
b) t Current Time indication (in 24-
hour system) t Sound field currently applied
a)
Type of program being broadcast (see page 26).
b)
Text messages sent by the RDS station.
tA1yA2y...yA0yB1yB2y...yB0T
tC0y...yC2yC1T
Using the Radio Data
System (RDS)
continued
GB01COV_HT-DDW870-UCA.book Page 25 Monday, December 20, 2004 2:00 PM