Sony HT-DDW870 - Manual (Page 40)

masterpage:Left
lename[E:\SEM_Janet\Revision_DDW870\J9040000_2549734121DDW870UCA\2549734121\
GB070TH_HT-DDW870-UCA.fm]
40 GB
model name1[HT-DDW870]
[2-549-734-12(1)]
You can set the receiver to turn off automatically
at a specified time.
Press SLEEP repeatedly while the power is
on.
Each time you press SLEEP, the display changes
cyclically as follows:
2-00-00
t 1-30-00 t 1-00-00 t 0-30-00 t
OFF
While using Sleep Timer, “SLEEP” lights up in
the display.
Using the remote
1
Press ALT to light up the button.
2
Press SLEEP repeatedly while the power is
on.
Tip
To check the remaining time before the receiver turns
off, press SLEEP. You can also use the remote by
pressing ALT to light up the button, then press SLEEP.
The remaining time appears in the display. If you press
SLEEP again, the sleep timer will be canceled.
You can select the front speaker system you
want to use.
Press SPEAKERS (OFF/A/B/A+B)
repeatedly to select the front speaker
system you want to use.
The selected speaker system appears in the
display. To turn off the speaker output, press
SPEAKERS (OFF/A/B/A+B) repeatedly until
the “SP A” and “SP B” indications in the display
turn off.
The speaker system
• SP A
The speakers connected to the SPEAKERS
FRONT A terminals.
• SP B
The speakers connected to the SPEAKERS
FRONT B terminals.
• SP A and SP B
The speakers connected to both the
SPEAKERS FRONT A and B terminals
(parallel connection).
Using the Sleep Timer Selecting the speaker
system
GB01COV_HT-DDW870-UCA.book Page 40 Monday, December 20, 2004 2:00 PM