Sony DCM-M1 User Manual
Page 15
Advertising
When you connect the MD DISCAM to your PC, you
need to make Windows settings.
1. Open "Network" from the Control Panel.
2. The configuration window of "Network" appears.
Select the built-in LAN board (the added board or card
in the case of additional installation)and open
"Properties".
3. The configuration window of "TCP/IP
Properties" appears. Check "Specify an IP
address" and set the following.
IP Address:192.168.0.1
Subnet Mask:255.255.255.0
Now you have set your PC. Let's move on to the MD DISCAM.
Advertising