Add an ethernet terminal to your pc – Sony DCM-M1 User Manual
Page 3
Advertising
A commercially available LAN
board or LAN card is required to
add an Ethernet Terminal to the
PC.
If you have a desktop, install a
LAN board to the PCI slot, refer to
the instruction manual about its
installation.
If you have a laptop, insert a LAN
card in the slot of your PC. Refer to
the instruction manual of the LAN
card about its installation.
*Contact the manufacturer regarding the installation of the board or card.(The MD
DISCAM will not provide customer support for the above devices.)
*The PCI slot type is recommended since it is easier to install. But please note that some
PC do not support PCI or have no free slots left.
Advertising