Sony DCM-M1 User Manual
Page 23
When connecting the MD DISCAM to your PC, start
the PC and make settings for the MacOS.
1.First, open APPLE MENU INTERNET ACCESS
"Internet Setup Assistant". (Click
when "Internet
Setup Assistant" is not installed.)
2. Would you like to set up your computer to use the
internet? - Select "Yes". (Refer to the illustration on the
left.)
3. Do you already have an Internet account? - Select
"Yes".
4. Give a name to this setting. Give a desired name to
the setting. It has been named "MD DISCAM" here.
(Refer to the illustration on the left.)
5. SELECT CONNECTION - Select LAN, not
MODEM, since the MD DISCAM supports Ethernet
connection. (Refer to the illustration on the left.)
6. Is there an IP address for this configuration? -
Select "Yes".
7. What is the IP address for this configuration? -
Input "192.168.0.1". (Refer to the illustration on the
left.)
8. What is the subnet mask for this configuration? -
Input "255.255.255.0".(Refer to the illustration on
the left.)
9. What is the router address for this configuration? -
Input "192.168.0.50".(Change only the last part of
the IP address set to the PC.)
10. Go to the next step without inputting anything for "Domain Name Server","Electronic Mail Address and
Password", "Electronic Mail Account and Host Computer" and "News Group Host Computer".
11. Do you use proxy servers for INternet connections? - Select "No".
The setup of the PC has been completed. Click "Set" and save those settings.