Sony DCR-TRV900 - Manual (Page 131)

131
Additional information
Trouble check
Others
Symptom
No function works though the power is
on.
DV synchro-editing does not function.
Cause and/or corrective actions
• Disconnect the power cord of the AC power adaptor or
remove the battery pack, then reconnect it in about 1
minute. Turn the power on. If the functions still do not
work, open the LCD panel and press the RESET button
beside the speaker using a sharp-pointed object. (If you
press the RESET button, all the settings including the date
and time return to the default.) (p. 136)
• The input selector on the VCR is not set correctly.
m Set the selector to DV input position. If you use
another DV camcorder, set the power switch to VTR.
• The camcorder is connected to DV equipment of other
than Sony.
m Operate normal editing.
• Setting program on a blank portion of the tape is
attempted.
m Set the program again on a recorded portion.