Sony DCR-TRV900 - Manual (Page 37)

37
Advanced operations
To cancel the fader function
Before pressing START/STOP, press FADER until the fade indicator disappears.
You cannot use the fader function in the following situations
– The START/STOP MODE selector is set to
ANTI GROUND SHOOTING or 5SEC.
– The camcorder is in the photo recording.
– A title is displayed on the LCD screen or in the viewfinder. If the title is not necessary,
erase it before using the fader function.
Note
During fading, you cannot operate the DIGITAL EFFECT button.
The fader function is effective in the following situations
• A big change of scene (FADE IN, FADE OUT)
• The beginning of a story (FADE IN)
• The end of a day (FADE OUT)
• Change the scene while leaving the trace of the previous scene
If you use the fader function repeatedly
The situation the subject is in cannot be seen clearly, thus making the picture difficult to
enjoy.
When the OVERLAP indicator appears
The camcorder automatically memorizes the image recorded on a tape. As the image is
being memorized, the OVERLAP indicator flashes fast, and the playback picture is
displayed. At this stage, the picture may not be recorded clearly, depending on the tape
condition.
Using the FADER function