Sony DCR-TRV900 - Manual (Page 21)

21
Basic operations
Using the EDITSEARCH, you can review the last recorded scene or check the recorded
picture on the LCD screen or in the viewfinder.
(1) While pressing the small green button on the POWER switch, set it to CAMERA.
(2) Press the РΠside of EDITSEARCH momentarily; the last few seconds of the
recorded portion plays back (Rec Review). Hold down the – side of EDITSEARCH
until the camcorder goes back to the scene you want. The last recorded portion is
played back. To go forward, hold down the + side (Edit Search).
To stop playback
Release EDITSEARCH.
To go back to the last recorded point (END SEARCH)
Press END SEARCH. The last recorded point is played back for about 5 seconds and stops.
Note that when you use a tape without cassette memory, this function does not work once
you eject the cassette after recording.
To begin re-recording
Press START/STOP. Re-recording begins from the point you released EDITSEARCH.
Provided you do not eject the tape, the transition between the last scene you recorded and
the next scene you record will be smooth.
Checking the recorded picture
END SEARCH
2 1
EDITSEARCH
EDITSEARCH
EDITSEARCH
POWER
OFF
CAMERA
MEMORY
VTR