Sony SLV-N900 - Manual (Page 21)

Getti
ng Sta
rted
21 Hookups
Hookup 5
Connecting to a digital satellite receiver
Recommended use
Use this hookup if you have a digital satellite receiver that is compatible with an
infrared remote control. It allows the VCR’s cable box/satellite receiver control
feature to control the channel on the digital satellite receiver, simplifying the
recording process. A list of compatible digital satellite receivers is on page 36.
What you can do with this hookup
• Record any channels by using the cable box/satellite receiver control feature to
select channels on the digital satellite receiver
What you cannot do
• Record with the digital satellite receiver turned off
• Record any channels from cable or an antenna (To record channels from cable or
an antenna, turn off the cable box/satellite receiver control feature.)
• Use a cable box
• Record programs with the VCR Plus+C 3 system (To use the VCR Plus+C 3 system,
turn off the cable box/satellite receiver control feature.)
IN
OUT
VHF/UHF
AUDIO VIDEO
LINE
OUT
OUT
VHF/UHF
IN
LINE
IN 1 LINE
OUT
AUDIO
VIDEO
Rear of TV
VHF/UHF
VHF
UHF
VCR
Match the
type of
connector on
your TV: A,
B, or C.
For
connector
types B and
C, no UHF
connection is
required.
B
C
or
or
A
VHF
UHF
Wall
Positioning the Digital
satellite receiver
Place the Digital satellite receiver
on top of the VCR so that it may
not block the sensor window on
the VCR.
Side view
Digital satellite
receiver
or
continued