Sony SLV-N900 - Manual (Page 44)

44 Playing a tape
To use the time counter
Press CLEAR at the point on the tape that you want to find later. The counter in the
display window resets to “0:00:00.” To search for the counter “0:00:00” point
automatically, see “To search for the counter 0:00:00 point” on page 67.
To display the counter on the TV screen, press DISPLAY.
Notes
• Tapes recorded in the LP mode on other VCRs can be played back on this VCR but the
picture quality cannot be guaranteed.
• While displaying a menu on the TV screen, you cannot use H PLAY, X PAUSE,
M FF, m REW, or x STOP buttons.
• The counter resets to “0:00:00” in the display window and on the TV screen whenever a tape
is reinserted.
• The counter stops counting when it comes to a portion with no recording.
• When 10 hours have passed, the counter in the display window returns to “0:00:00” and the
count starts over again.
• When playback does not start even if you insert a tape with its safety tab removed, set “Auto
play” in the ADVANCED OPTIONS menu correctly (page 69).
• The SLV-N900 can also play S-VHS tapes. The SLV-N900 will automatically identify the
type of tape inserted in the VCR (either VHS or S-VHS). When S-VHS tapes are played in
the SLV-N900, the enhanced resolution will not be visible on screen; there may also be
picture distortion while playing the S-VHS tape in slow motion or while utilizing other
special playback modes. The SLV-N900 will not record in S-VHS mode on an S-VHS tape.