Sony SLV-N900 - Manual (Page 64)

64 Checking/changing/canceling timer settings
When the timer settings overlap
The program that starts first has priority and the second program starts recording only
after the first program has finished. If the programs start at the same time, the
program listed first in the menu has priority.
3 Press M/m to move the cursor (B) to “Timer set/check,” then press OK.
• If you want to change a setting, go on to the next step.
• If you do not need to change the settings, press MENU, then turn off the VCR
to return to recording standby.
4 Press M/m to move the cursor (B) to the setting
you want to change or cancel.
• To change the setting, press </, to flash the
item you want to change, and press M/m to
change it.
• To cancel the setting, press CLEAR.
5 Press OK to confirm the setting.
6 Press MENU to exit the menu.
If any timer settings remain, turn off the VCR to return to recording standby.
Select
: : End
:
CH START STOP DATE SPD
OK
Bb
MENU Quit
Set : Vv
3 5 8 : 0 0 9 : 0 0 9 / 3 0 SP
2 0 10 : 0 0 11 : 3 0 10 / 0 EP
– – – : – – – : – – – – – --
– – – : – – – : – – – – – --
– – – : – – – : – – – – – --
– – – : – – – : – – – – – --
– – – : – – – : – – – – – --
6 0 8 : 3 0 10 : 0 0 9 / 3
2
0 AUTO
PM
AM
PM PM
AM
PM
Will be cut off
Program 1
Program 2