Sony SLV-N900 - Manual (Page 50)

50 Recording TV programs using the Dial Timer
To return to the previous step
To return to the previous step, press the CHANNEL + and – buttons on the VCR at
the same time during any of the Dial Timer settings.
To stop recording
To stop the VCR while recording, press x STOP.
To use the VCR after setting the timer
To use the VCR before a timer recording begins, just press ?/1. The TIMER
indicator disappears from the display window and the VCR switches on. Remember
to press ?/1 to reset the VCR to the timer recording standby mode after using the
VCR.
You can also do the following tasks while the VCR is recording:
• Reset the counter (page 44).
• Display tape information on the TV screen (page 46).
• Check the timer settings (page 63).
• Watch another TV program (page 47).
7 Press DIAL TIMER.
“CH” and “Current channel” appear alternately in the display window.
8 Turn DIAL TIMER to set the channel number.
To record from a source connected to the LINE IN 1 or LINE-2 IN jacks,
turn DIAL TIMER or press INPUT SELECT to display “L1” or “L2.”
9 Press DIAL TIMER to complete the setting.
“OK” appears in the display window for about five seconds.
The TIMER indicator appears in the display window and the VCR stands by
for recording. When using a cable box, leave it on.
DIAL TIMER
DIAL TIMER
INPUT
SELECT
DIAL TIMER