Sony BDV-N8100W - Manual (Page 64)

64 US
BDV-N9100W/BDV-N8100W/BDV-N7100W
4-456-334-12(1)
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF
01)\4456334121_US (U)\090SET.fm masterpage: Left
[Music Settings]
x [Super Audio CD Playback Layer]
[Super Audio CD]: Plays the Super Audio
CD layer.
[CD]: Plays the CD layer.
x [Super Audio CD Playback
Channel]
[DSD 2ch]: Plays the 2-channel area.
[DSD Multi]: Plays the multi-channel area.
[System Settings]
x [OSD Language]
You can select the language you want for
the system on-screen display.
x [Wireless Sound Connection]
You can make further settings for the
wireless system. For details, see “Further
Settings for the Wireless System”
(page 57).
You can also check the wireless
transmission status. When wireless
transmission is activated, [OK] appears to
the right of [Status].
x [Main Unit illumination]
[On]: The top panel display always is
turned on, soft-touch buttons indicator are
always lit and the brightness of the LED
indicator is the maximum.
[Auto]: The top panel display and soft-
touch buttons indicator are turned off and
the brightness of LED indicator is reduced
automatically if you do not operate the
system for about 10 seconds.
When [Auto] is selected, only N button lights up
during playback.
x [HDMI Settings]
[Control for HDMI]
[On]: Turns on the [Control for HDMI]
function. You can operate mutually
between equipment that are connected with
an HDMI cable.
[Off]: Off.
[Audio Return Channel]
This function is available when you
connect the system to a TV’s HDMI IN
jack that is compatible with the Audio
Return Channel function and [Control for
HDMI] is set to [On].
[Auto]: The system can receive the digital
audio signal of the TV automatically via an
HDMI cable.
[Off]: Off.
x [Quick Start Mode]
[On]: Shortens the startup time from
standby mode. You can operate the system
quickly after turning it on.
[Off]: The default setting.
x [Power Save Drive]
[On]: Reduces power consumption when
volume level is low.
[Off]: Normal status. The system can
output sound volume.
x [Auto Display]
[On]: Automatically displays information
on the screen when changing the viewing
titles, picture modes, audio signals, etc.
[Off]: Displays information only when you
press DISPLAY.
Note