Sony PCG-SR27 - Manual (Page 39)

Using Local Area Network (LAN)
39
To connect to the network (Windows 2000):
1 Right-click My Network Places and select Properties. The Network and
Dial-up Connections dialog box displays.
2 Click Make a New Connection. The Network Connection Wizard displays.
Following the online instructions, enter the necessary setting provided by
your network administrator to connect to the network.
To set network components (Windows Me):
1 Right-click My Network Places and select Properties.
2 Click the Configuration tab. This will give you access to a listing of installed
network components. If you do not see the component you desire, click Add
and follow the on-screen installation instructions.
To set network components (Windows 2000):
1 Right-click My Network Places and select Properties. The Network dialog
box displays.
2 Click on Add. This will give you access to add or remove network
components. Follow the on-screen installation instructions.