To remove a memory module – Sony PCG-SR27 User Manual
Page 75
Advertising
To Remove a Memory Module
75
8
Close the display panel and replace the six (6) screws on the bottom of the
notebook.
9
Use the Phillips (+) screwdriver to tighten all six screws at the locations
shown below.
To Remove a Memory Module
1
Perform steps 1 through 3 of “To Install a Memory Module” .
2
Touch a metal object (such as the connector panel on the back of your
notebook) to discharge static electricity.
Aligning the Palm Rest
Notch on Keyboard
Advertising
This manual is related to the following products: