Radio, Initial system start-up, Adjusting volume – Alpine DVA-9861Ri User Manual

Page 10: Setting time, Listening to radio

Advertising
background image

9

-EN

01GB05DVA9861Ri.fm

ALPINE DVA-9861Ri 68-04123Z62-A (EN)

Initial System Start-Up

Be sure to press the RESET switch when using the unit for the first
time, after changing the car battery, etc.

1

Turn off the unit power.

2

Press

(OPEN) to open the front panel, then

remove it.

3

Press RESET with a ballpoint pen or similar pointed
object.

Adjusting Volume

Turn the Rotary encoder until the desired sound is
obtained.

Setting Time

1

Press TITLE repeatedly until the time is displayed.

For details, see “Displaying the Text” (page 27).

2

Press and hold TITLE for at least 2 seconds while
the time is displayed.

The time indication will blink.

3

Turn the Rotary encoder to adjust the hours while
the time indication is blinking.

4

When the hour has been adjusted, press MODE.

5

Turn the Rotary encoder to adjust the minutes
while the time indication is blinking.

The time is automatically set 5 seconds after the minute
adjustment. The time can also be manually set by pressing
TITLE.

To synchronize the clock to another clock/watch or radio time

announcement, press and hold MODE for at least 2 seconds after
setting the “hour.” Minutes will reset to 00. If the display shows over
“30” minutes when you do this, the time will advance one hour.

Listening to Radio

1

Press SOURCE/POWER until a radio frequency
appears in the display.

2

Press BAND repeatedly until the desired radio band
is displayed.

F1

(FM1)

F2

(FM2)

F3

(FM3)

MW

LW

F1 (FM1)

3

Press TUNE/A.ME to select the tuning mode.

DX SEEK (Distance mode)

SEEK (Local mode)

OFF (Manual mode)

DX SEEK

The initial mode is Distance mode.

Distance mode:

Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).

Local mode:

Only strong stations will be automatically tuned in (Automatic
Seek Tuning).

Manual mode:

The frequency is manually tuned in steps (Manual tuning).

4

Press

or

to tune in the desired station.

Holding down

or

will change the frequency

continuously.

RESET switch

Radio

SOURCE/
POWER

Rotary
encoder

BAND

FUNC.

Preset buttons
(1 through 6)

TUNE/
A.ME

MODE

01GB00DVA9861Ri.book Page 9 Wednesday, December 7, 2005 12:00 PM

Advertising