Alpine DVA-9861Ri - Manual (Page 60)

59
-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
• Mechanism error.
1) Press and eject the disc.
If the disc does not eject, press again for at least 2 seconds
and eject the disc.
If the disc still does not eject, consult your Alpine dealer.
2) When the error indication remains after ejecting, press
again.
If the error indication still does not turn off after pressing
a few times, consult your Alpine dealer.
• No disc is inserted.
- Insert a disc.
• Although a disc is inserted, “NO DISC” is displayed and the unit
does not start to play or eject the disc.
- Remove the disc by following step:
Press again for at least 2 seconds.
• Remote control operation is not possible.
- For some discs or playing modes, certain operations are not
possible. This is not a malfunction.
• Disc does not match regional code number.
- Load a disc that matches the regional code number.
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
- Leave the power OFF until the temperature decreases and then
turn the power ON again.
• Mechanism error.
1) Press and eject the disc.
If the disc does not eject, press again for at least 2 seconds
and eject the disc.
If the disc still does not eject, consult your Alpine dealer.
2) When the error indication remains after ejecting, press
again.
If the error indication still does not turn off after pressing
a few times, consult your Alpine dealer.
Indication for DVD/Video CD Player
(Audio display)
(Monitor display)
(Audio display)
(Monitor display)
(Monitor display)
(Audio display)
(Monitor display)
(Audio display)
(Monitor display)
(Audio display)
(Monitor display)
01GB00DVA9861Ri.book Page 59 Wednesday, December 7, 2005 12:00 PM