Sony CMT-RB5 - Manual (Page 10)

10
Listening to the radio
— Preset Tuning
Preset radio stations in the tuner’s memory first
(see page 7).
To turn on the system, press ?/1 (power).
>
M m
N X x
?/1
.
2
1
STEREO/
MONO
VOL –
TUNING – TUNING +
VOL +
3 3
1
Press TUNER/BAND to select “FM” or
“AM.”
2
Press MODE repeatedly until
“PRESET” appears.
F M 7 8 . 5 0
3
Press PRESET +/– to select the desired
preset station.
F M 1 7 8 5 . 0
When you preset only one station,
“ONE PRESET” appears in the display.
* European model only
? / 1
(power)
To Do this
Turn off the radio Press ?/1 to turn off the
system.
Adjust the volume Press VOL +/– repeatedly
Listening to non-preset radio
stations
• Press MODE repeatedly until “MANUAL”
appears in step 2, then press TUNING +/–
repeatedly to tune in the desired station
(
Manual Tuning ).
• Press MODE repeatedly until “AUTO” appears
in step 2, then press TUNING +/–. The
frequency indication changes and the scanning
stops when the system tunes in a station
(
Automatic Tuning ).
To cancel Automatic Tuning
Press MODE.
Tips
• Pressing TUNER/BAND when the system is off
automatically turns on the system and tunes in the
last received station (
One Touch Play ).
• You can switch from another source to the tuner
just by pressing TUNER/BAND ( Automatic
Source Selection ).
• To improve broadcast reception, adjust the supplied
antennas, or connect a commercially available
external antenna (see page 21).
• When an FM stereo program has static noise, press
STEREO/MONO until “MONO” appears in the
display. There will be no stereo effect, but the
reception will improve. Press the button again to
restore the stereo effect.
Frequency (or RDS
station name*) Preset number