Sony CMT-RB5 - Manual (Page 7)

7
Getting Started
Step 3: Presetting radio
stations
You can preset up to 30 stations, 20 for FM and
10 for AM.
>
M m
N X x
?/1
.
5
2
1
4
3
STEREO/
MONO
PRESET +/–
1
Press TUNER/BAND to select “FM” or
“AM.”
Pressing TUNER/BAND turns on the
system.
2
Press MODE repeatedly until “AUTO”
appears.
F M 7 8 . 5 0
3
Press TUNING +/–.
The frequency indication changes and the
scanning stops when the system tunes in a
station. “TUNED” and “STEREO” (for a
stereo program) appear.
4
Press MEMORY.
A preset number flashes in the display. The
stations are stored from preset number 1.
M E M O R Y M F 1
5
Press ENTER.
“COMPLETE !!” appears, and then the
station is stored.
6
Repeat steps 1 to 5 to preset other
stations.
To stop scanning
Press MODE.
To tune in a station with a weak
signal
Press MODE repeatedly until “MANUAL”
appears in step 2, then press TUNING +/–
repeatedly to tune in the station manually.
To set another station to an
exist preset number
Start over from step 1. After step 4, press
PRESET +/– repeatedly to select the preset
number that you want to overwrite to. And then,
press ENTER.
continued