Sony CMT-RB5 - Manual (Page 19)

19
Connecting optional components
Connecting optional
components
Connecting optional A/V
components
To enhance your system, you can connect optional
components. Refer to the operating instructions of
each component.
Connecting audio components
Connecting an MD deck for
digital recording
You can record from CD into the MD deck
digitally by connecting a commercially available
optical cable.
To the digital input connector
on the MD deck
Connecting an MD deck for
analog recording
You can connect an MD deck to the system with
commercially available audio cords. Be sure to
match the color-coded pins to the appropriate
jacks. To listen to the MD deck after connecting it,
press FUNCTION until “MD” appears.
To the audio input jacks on the
MD deck
To the audio output jacks on
the MD deck
Other Features/Connecting optional components
continued
Tip
If you cannot select “MD” by pressing FUNCTION,
turn off the system, and then press ?/1 while pressing
down FUNCTION. The function will be switched
from “VIDEO” to “MD”. To go back to “VIDEO”,
repeat this procedure.
Connecting a VCR
You can connect a VCR to the system with a
commercially available audio cord. Be sure to
match the color-coded pins to the appropriate
jacks. To listen to the VCR after connecting it,
press FUNCTION until “VIDEO” appears.
To the audio output jacks on
the VCR
Tip
If you cannot select “VIDEO” by pressing
FUNCTION, turn off the system, and then press ?/1
while pressing down FUNCTION. The function will
be switched from “MD” to “VIDEO”. To go back to
“MD”, repeat this procedure.