Sony DCR-TRV480 - Manual (Page 117)

Using with your computer 117
Usi
ng w
ith
yo
ur co
mpu
te
r
4
Start playback on the analog video
unit.
5
Start capturing procedures on your
computer.
Regarding operation, refer to the operating
instructions supplied with the software or
the on-line help. After capturing images and
sound, stop capturing procedures on your
computer, and stop playback on the analog
video unit.
After capturing images and sound
Stop capturing procedures on your computer,
and stop playback on the analog video unit.
b Notes
• The bundled software Picture Package or
ImageMixer VCD2 do not support the digital
convert function.
• You may not be able to output the pictures correctly
depending on the condition of the analog video
signal input to your camcorder.
• You cannot transfer pictures with copyright
protection signals to a computer.
• You can use a USB cable instead of an i.LINK cable
(optional) to transfer pictures to a computer. Note,
however, that the picture displayed may lack the
smoothness.
• When you are using a USB cable or an i.LINK cable
to connect your camcorder to a computer, make sure
you insert the connector in the correct direction. If
you insert the connector forcibly, it may be
damaged, and causes a malfunction of your
camcorder.