Sony PCG-SRX99K User Manual
Page 31
3.
Click Add. The Edit Configuration dialog box appears.
4.
Type a profile name, and select Access Point from the Network Type drop-down list if it is not already selected.
5.
Click Next.
6.
Type a name in the Network Name box or click Scan to select a network.
7.
Click Next.
8.
If the network was set up with an encryption key:
1.
Click to select the Enable Data Security check box.
2.
Select either Use Alphanumeric Characters or Use Hexadecimal, depending on the encryption key.
3.
Type the five-character encryption key in the Key 1 box, and make sure Key 1 appears in the Encrypt
data with box. Ask the network administrator for the encryption key if you don't already have it.
4.
Click Next.
If the network was not set up with an encryption key, then click Next.
Add/Edit Configuration Profile Window
9.
Select a power management option, and click Next.
Page 31