Sony PCG-SRX99K - Manual (Page 42)

i.LINK optical (disc) drives
The i.LINK drive enables you to read data stored on a DVD or CD. Your computer may come with an external i.LINK drive,
depending on the model you purchased. Once the i.LINK drive is connected, you can use the preinstalled software to create
CDs or play DVDs.
The i.LINK optical drive draws power from the computer through a peripheral cable. You must connect the peripheral cable
to both the i.LINK port and DC OUT jack on your computer. 1
Do not use the i.LINK optical drive and the PC Card drive at the same time. Connecting both devices may cause the
computer to malfunction.
To connect an i.LINK optical drive
1. Close any active programs to prevent data loss.
2. Turn on power to the computer.
3. Insert the L-shaped connector on the peripheral cable (supplied with the i.LINK optical drive) into the matching
port on the rear panel of the i.LINK optical drive.
Connecting the i.LINK Optical Driv e
4. Turn the LOCK device clockwise to secure the L-shaped connector.
5. Insert the two-prong peripheral cable connector into both the i.LINK port and DC OUT jack on the computer.
The i.LINK drive power indicator turns on, and the computer automatically detects the connected drive.
6. Restart your computer.
To use the i.LINK optical drive
1. Double-click the My Computer icon on the desktop. The My Computer window appears.
2. Double-click DVD/CD-RW Drive. The DVD/CD-RW Drive window appears.
To disconnect the i.LINK optical drive
1. Close any active programs to prevent data loss.
Page 42