Sony STR-DA5800ES - Manual (Page 113)

113 US
Ad
ju
st
ing
Setti
ng
s
This function targets content via a USB device
and a home network.
x Auto
Select this to display 3D compatible content in
3D.
x Off
Select this to display all content in 2D.
This function targets content via a USB
device, a home network, and Internet content.
x 16:9
Select this when connecting to a wide-screen
TV or a TV with a wide-mode function.
x 4:3
Select this when connecting to a 4:3 screen TV
without a wide-mode function.
This function targets content via a USB
device, a home network, and Internet content.
x Original
Select this when connecting to a TV with a
wide-mode function. Displays a 4:3 screen
picture in 16:9 aspect ratio even on a wide-
screen TV.
x Fixed Aspect Ratio
Changes the picture size to fit the screen size
with the original picture aspect ratio.
HDMI Settings
You can adjust the required settings for
equipment connected to the HDMI jacks.
Lets you set the level of the subwoofer to 0 dB
or +10 dB when PCM signals are input via an
HDMI connection. You can set the level for
each input to which an HDMI input jack is
assigned independently.
x 0 dB
x Auto
Automatically sets the level to 0 dB or +10 dB,
depending on the audio stream.
x +10 dB
Lets you set the HDMI audio signals output
from the playback equipment connected to the
receiver via an HDMI connection.
x TV+AMP
The sound is output from the TV speaker and
the speakers connected to the receiver.
Notes
• The sound quality of the playback equipment
depends on the TV’s sound quality, such as the
number of channels, and the sampling frequency,
etc. If the TV has stereo speakers, the sound output
from the receiver is also in stereo as that of the TV,
even if you play multi-channel source.
• When you connect the receiver to a video device
(projector, etc.), sound may not be output from the
receiver. In this case, select “AMP.”
• When you do not select an HDMI input jack as an
audio input in “Audio Input Assign” in the Input
Settings menu, sound is not output from the TV.
3D Output Settings
TV Type
Screen Format
Subwoofer Level
Audio Out
continued